DVG-2102S User’s Manual MAINTENANCE
D-Link Systems, Inc. 69
3-3-4 Dynamic DNS
ADVANCED → Dynamic DNS
Enable Dynamic DNS: Check the box to enable DDNS function. It is only necessary when the VoIP
Telephone Adapter is set up behind an Internet sharing device that uses a dynamic IP address and does
not support DDNS.
Server Address: Select a DDNS service from the drop and down arrow.
Hostname: Enter the URL of the system (or NAT) – applied from domain name registration providers (e.g.
www.dyndns.org).
Username or Key/Password or Key: Enter the Login ID and password used to log-in to the DDNS server.
Note: If the VoIP Telephone Adapter is set up under NAT, then enter the hostname in the NAT IP/Domain
that is the same as the Hostname of the DDNS.
To Next Page
Loading...
