D-Link DWC-2000 - Page 22

20
16
show system time setup
Display Timezone and
NTP configuration.
17
show system traffic_meter
Display traffic meter
configuration.
18
show system traffic_meter setup
Display traffic meter
configuration.
19
show system usb
Display USB
Configuration.
20
show system users
System group display
mode.
21
show system group
System user display
mode.
22
show system group
specific <row_id>
Display information for
given group.
23
show system group all
Display all groups on
system.
24
show system users all
Display all users on
system.
25
show system users
specific <row_id>
Display information for
given user.
26
show system group
groupaccesscontrol <group_id>
Displays Group Access
Control configuration
for the selected group.
27
show system group
access_control_browser
Displays Access
Control browsers list.
28
show system group
access_control_ip
Displays Access
Control ips list.
29
show system firmwareVersion
Display the firmware
Version.
The command “show pop3-serverCheck ?” at the CLI prompt, gives a
description of all the show commands in the branch pop3-serverCheck , these
are as follows:
1
show pop3-serverCheck
Display status of Pop3 servers.
The command “show Radius-serverCheck ?” at the CLI prompt, gives a
description of all the show commands in the branch Radius-serverCheck ,
these are as follows:
1
show Radius-serverCheck
Display status of Radius servers.
The command “show security ?” at the CLI prompt, gives a description of all
the show commands in the branch security , these are as follows: