D-Link Unified Access System Software User Manual
02/15/2011
Page 142 Document 34CS3000-SWUM104-D10
Figure 65: AP De-Authentication Attack Status
Click Refresh to update the screen with the most current information.
Monitoring Associated Client Information
You can view a variety of information about the wireless clients that are associated with the APs the switch manages. To
access the associated client information, click Monitoring > Client > Associated Clients.
Figure 66: Associated Client Status
The following tabs are available:
• Status—Shows status information about wireless clients that are associated with APs managed by the switch and
contains the following information:
- Summary—Shows basic information about associated clients.
- Client QoS—Shows Associated Client QoS status.
- Detail—Shows more detailed information about associated clients, such as which VLAN the client is assigned to
and how long the client has been inactive.
- Neighbor APs—Shows the managed APs that are within range of the wireless clients, which can help you determine
the managed AP an associated client might use for roaming.
• SSID Status—Shows the SSID and client MAC address of all clients connected to specific networks.
Table 44: AP De-Authentication Attack Status
Field Description
BSSID BSSID of the AP against which the attack is launched. The range is MAC Address.
Channel The channel on which the rogue AP is operating. The range is 1-161.
Time Since Attack Launched The time since the attack started on this AP. The range is the time stamp.
Age The time since the RF Scan report about this AP. The range is the time stamp.
To Next Page
Loading...
Need help?
General
