15D-Link DWM-312 User Manual
Section 4 - Conguration
Choose whether the DWM-312 should only use 4G networks, 3G
networks, 2G networks, or use Auto Mode to automatically select
a network.
Enabling this option will allow you to connect when roaming
outside your carrier’s home coverage.
Note: Roaming connections may incur additional fees from your
service provider.
Choose Always when you want to establish mobile connection all
the time. Choose Manual to only connect when you click Connect
on the home screen. If you choose Connect-on-demand, the
device will establish a mobile connection when local users want to
connect to the Internet, and disconnect if there is no trac after
the time period dened by the Maximum Idle Time setting.
Note: These options are only available if SIMA Only has been
selected in WAN Service on page 15.
If you have chosen Connect-on-demand, enter the maximum idle
time before disconnection in seconds.
Specify IPv4, IPv6, or IPv4/IPv6 to determine what type of IP
address will be allocated by your ISP. This information should be
provided by your ISP.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
Prefer Service
Type:
Allow Data
Roaming:
Reconnect
Mode:
Maximum Idle
Time:
IP Type:
Connection Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
