D-Link DWM-312

29D-Link DWM-312 User Manual
Section 4 - Conguration
PPTP
PPTP Server
Check this box to enable the DWM-312’s internal PPTP server. If
enabled, the following options will appear:
Select one or more authetication types for the server, either PAP,
CHAP, MS_CHAP, or MS_CHAP2. Note that PAP and CHAP are
not compatible with encryption.
Enter the address assigned to the server within the VPN. This will
dictate the IP pool for clients.
Input the starting address for the server’s IP pool, from 1 to 254.
Input the end address for the server’s IP pool from 1 to 254. Note
that this number must be higher than the start address.
Check this box to enable PPTP encryption.
Specify the length of the encryption key.
Up to 5 user accounts can be created for VPN access. Specify the
user names and passwords that will be used to connect to the
VPN server. Note that user names and passwords are visible to any
adminstrator.
Server Seup:
Authentication
Type:
Server Virtual IP:
IP Pool Start
Address:
IP Pool End
Address:
Encryption:
Encryption
Length:
User Account
Setting: