D-Link DWM-312W

34D-Link DWM-312W User Manual
Section 4 - Conguration
PPTP
Without
authorization
Enable this setting to connect without a username
and password. This conguration is uncommon and is
disabled by default.
Username If Without authorization is disabled, specify the PPP
username provided by your ISP
Password If Without authorization is disabled, specify the PPP
password provided by your ISP.
VPN server
address
Specify the VPN server address provided by your ISP.
MTU Specify the Maximum Transmission Unit of your Internet
connection. You may need to change the MTU for optimal
performance with your ISP. The default setting is 1456.
Encryption
protocol
Choose No Encryption, MPPE 40 125 bit, MPPE 40 bit, or
MPPE 128 bit.
Authentication
protocol
Choose from AUTO, PAP, CHAP, MS-CHAP, or MS-CHAPv2.
AUTO is selected by default.
Keep Alive Toggle this switch to maintain your connection when no
activity is detected
For the remainder of the PPTP conguration options, refer to pages
30-32.