3.12. DateTime
Description
Set the date, time and time zone information for this system.
Properties
TimeZone
Specifies the time zone. (Default: GMT)
DSTEnabled
Enable daylight saving time. (Default: Yes)
DSTOffset
Daylight saving time offset in minutes. (Default: 60)
DSTStartMonth
What month daylight saving time starts. (Default: March)
DSTStartDay
What day of month daylight saving time starts. (Default: 1)
DSTEndMonth
What month daylight saving time ends. (Default: October)
DSTEndDay
What day of month daylight saving time ends. (Default: 1)
TimeSyncEnable
Enable time synchronization. (Default: No)
TimeSyncServerType
Type of server for time synchronization, UDPTime or SNTP
(Simple Network Time Protocol). (Default: SNTP)
TimeSyncServer1
DNS hostname or IP Address of Timeserver 1.
TimeSyncServer2
DNS hostname or IP Address of Timeserver 2. (Optional)
TimeSyncServer3
DNS hostname or IP Address of Timeserver 3. (Optional)
TimeSyncInterval
Seconds between each resynchronization. (Default: 86400)
TimeSyncMaxAdjust
Maximum time drift in seconds that a server is allowed to ad-
just. (Default: 600)
TimeSyncGroupIntervalSize
Interval according to which server responses will be grouped.
(Default: 10)
Comments
Text describing the current object. (Optional)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
3.12. DateTime Chapter 3. Configuration Reference
107
To Next Page
Loading...
