D-Link NetDefend DFL-210

connections -show [-num=<n>] [-verbose] [-srciface=<interface>]
[-destiface=<interface>] [-protocol=<name/num>]
[-srcport=<port>] [-destport=<port>] [-srcip=<ip addr>]
[-destip=<ip addr>]
List connections.
connections
Same as "connections -show".
connections -close [-all] [-srciface=<interface>]
[-destiface=<interface>] [-protocol=<name/num>]
[-srcport=<port>] [-destport=<port>] [-srcip=<ip addr>]
[-destip=<ip addr>]
Close connections.
Options
-all
Mark all connections.
-close
Close all connections that match the filter expression. (Admin
only)
-destiface=<interface>
Filter on destination interface.
-destip=<ip addr>
Filter on destination IP address.
-destport=<port>
Show only given destination TCP/UDP port.
-num=<n>
Limit list to <n> connections. (Default: 20)
-protocol=<name/num>
Show only given IP protocol.
-show
Show connections.
-srciface=<interface>
Filter on source interface.
-srcip=<ip addr>
Filter on source IP address.
-srcport=<port>
Show only given source TCP/UDP port.
-verbose
Verbose (more information).
2.2.12. cpuid
Display info about the cpu.
Description
Display the make and model of the machine's CPU.
Usage
cpuid
2.2.12. cpuid Chapter 2. Command Reference
37