D-Link NetDefend DFL-210

igmp -join <Interface> <MC address> [<host address>]
Simulate an incoming IGMP join message.
igmp -leave <Interface> <MC address> [<host address>]
Simulate an incoming IGMP leave message.
Options
-join
Simulate an incoming IGMP join message.
-leave
Simulate an incoming IGMP leave message.
-query
Simulate an incoming IGMP query message.
-state
Show the current IGMP state.
<host address>
Host IP address.
<Interface>
Interface.
<MC address>
Multicast Address.
<router address>
Router IP address.
2.2.32. ikesnoop
Enable or disable IKE-snooping.
Description
Turn IKE on-screen snooping on/off. Useful for troubleshooting IPsec connections.
Usage
ikesnoop
Show IKE snooping status.
ikesnoop -on [<ip address>] [-verbose]
Enable IKE snooping.
ikesnoop -off
Disable IKE snooping.
Options
-off
Turn IKE snooping off.
2.2.32. ikesnoop Chapter 2. Command Reference
48