1.4. Command line history
Every time a command is run, the command line is added to a history list. The up and down arrow
keys are used to access previous command lines (up arrow for older command lines and down arrow
to move back to a newer command line). See also Section 2.4.3, “history”.
Example 1.3. Command line history
Using the command line history via the arrow keys:
gw-world:/> show Address
gw-world:/> (up arrow)
gw-world:/> show Address (the previous commandline is displayed)
1.4. Command line history Chapter 1. Introduction
15
To Next Page
Loading...
