Show all changes.
Options
-changes
Show all changes in the current configuration.
-disabled
Show disabled properties.
-errors
Show all errors in the current configuration.
-references
Show all references to this object from other objects.
-verbose
Show error details.
<Category>
Category that groups object types.
<Identifier>
The property that identifies the configuration object. May not be applicable
depending on the specified <Type>.
<Type>
Type of configuration object to perform operation on.
2.1.12. undelete
Restore previously deleted objects.
Description
Restore a previously deleted object.
This is possible as long as the activate command has not been called.
See also: delete
Example 2.7. Undelete an object
Undelete an unreferenced object:
gw-world:/> delete Address IP4Address example_ip
gw-world:/> undelete Address IP4Address example_ip
Undelete a referenced object:
(will remove the error in examplerule)
gw-world:/> set IPRule examplerule SourceNetwork=examplenet
gw-world:/> delete Address IP4Address examplenet -force
gw-world:/> undelete Address IP4Address examplenet
Usage
undelete [<Category>] <Type> [<Identifier>]
Options
<Category>
Category that groups object types.
2.1.12. undelete Chapter 2. Command Reference
29
To Next Page
Loading...
