3.28. IGMPSetting
Description
IGMP parameters can be tuned for one, or a group of interfaces in order to match the characteristics
of a network.
Properties
Name
Specifies a symbolic name for the object. (Identifier)
Interface
The interfaces that these settings should apply to.
RobustnessVariable
IGMP is robust to (Robustness Variable - 1) packet losses.
(Default: 2)
MaxRequestsPerSecond
Maximum number of IGMP requests to process each second
and interface. (Default: 100)
RouterVersion
Multiple IGMP querying routers on a network must use the
same IGMP version. (Default: IGMPv3)
LowestCompatibleVersion
The lowest IGMP version to allow on incoming requests.
(Default: IGMPv1)
QueryInterval
The interval between general queries sent by the security
gateway. (Default: 125000)
QueryResponseInterval
The maximum time until a host (client) has to send an answer
to a query. (Default: 10000)
LastMemberQueryInterval
The maximum time until a host (client) has to send an answer
to a group and group-and-source specific query. (Default:
10000)
LastMemberQueryCount
The number of group and group-and-source specific queries
sent until the security gateway decides there are no more sub-
scribers to a specific multicast group. (Default: 2)
StartupQueryInterval
The general query interval to use during the startup phase.
(Default: 30000)
StartupQueryCount
The number of startup queries to send during the startup
phase. (Default: 2)
UnsolicatedReportInterval
The time between repetitions of a host's initial membership
reports to a group. (Default: 1000)
ReactToOwnQueries
Should the system respond to Member Report Queries orgin-
ating from itself. (Default: No)
Comments
Text describing the current object. (Optional)
3.28. IGMPSetting Chapter 3. Configuration Reference
132
To Next Page
Loading...
