3.33. IPsecAlgorithms
Description
Configure algorithms which are used in the IPsec phase of an IPsec session.
Properties
Name
Specifies a symbolic name for the object. (Identifier)
NULLEnabled
Enable plaintext. (Default: No)
DESEnabled
Enable DES encryption algorithm. (Default: No)
DES3Enabled
Enable 3DES encryption algorithm. (Default: No)
AESEnabled
Enable AES encryption algorithm. (Default: No)
BlowfishEnabled
Enable Blowfish encryption algorithm. (Default: No)
TwofishEnabled
Enable Twofish encryption algorithm. (Default: No)
CAST128Enabled
Enable CAST128 encryption algorithm. (Default: No)
SDT2Enabled
Enable SDT2 encryption algorithm. (Default: No)
BlowfishMinKeySize
Specifies the minimum Blowfish key size in bits. (Default: 128)
BlowfishKeySize
Specifies the Blowfish preferred key size in bits. (Default: 128)
BlowfishMaxKeySize
Specifies the maximum Blowfish key size in bits. (Default: 448)
TwofishMinKeySize
Specifies the minimum Twofish key size in bits. (Default: 128)
TwofishKeySize
Specifies the Twofish preferred key size in bits. (Default: 128)
TwofishMaxKeySize
Specifies the maximum Twofish key size in bits. (Default: 256)
AESMinKeySize
Specifies the minimum AES key size in bits. (Default: 128)
AESKeySize
Specifies the preferred AES key size in bits. (Default: 128)
AESMaxKeySize
Specifies the maximum AES key size in bits. (Default: 256)
MD5Enabled
Enable MD5 integrity algorithm. (Default: No)
SHA1Enabled
Enable SHA1 integrity algorithm. (Default: No)
XCBCEnabled
Enable XCBC-AES integrity algorithm. (Default: No)
Comments
Text describing the current object. (Optional)
3.33. IPsecAlgorithms Chapter 3. Configuration Reference
150
To Next Page
Loading...
