3.5. ARP
Description
Use an ARP entry to publish additional IP addresses and/or MAC addresses on a specified interface.
Properties
Mode
Static, Publish or XPublish. (Default: Publish)
Interface
Indicates the interface to which the ARP entry applies; e.g. the interface the ad-
dress shall be published on.
IP
The IP address to be published or statically bound to a hardware address.
MACAddress
The hardware address associated with the IP address. (Default:
00-00-00-00-00-00)
Comments
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
3.5. ARP Chapter 3. Configuration Reference
99
To Next Page
Loading...
