3.38. LogReceiver
This is a category that groups the following object types.
3.38.1. EventReceiverSNMP2c
Description
A SNMP2c event receiver is used to receive SNMP events from the system.
Properties
Name
Specifies a symbolic name for the log receiver. (Identifier)
IPAddress
Destination IP address.
Port
Destination port. (Default: 162)
Community
Community string. (Default: public)
RepeatCount
Repetition counter. (Default: 0)
LogSeverity
Specifies with what severity log events will be sent to the specified log receiv-
ers. (Optional; Default: Emergency,Alert,Critical,Error,Warning,Notice,Info)
RoutingTable
Specifies the routing table the clients host route should be added to. (Default:
main)
Comments
Text describing the current object. (Optional)
3.38.1.1. LogReceiverMessageException
Description
A log message exception is used to override the severity filter in the log receiver.
Properties
LogCategory
The Category of the log message.
LogID
The ID number of the log message, a empty value selects all messages of this
category. (Optional)
LogType
EXCLUDE or INCLUDE. (Default: EXCLUDE)
LogSeverity
Specifies with what severity log events will be sent to the specified log receiv-
ers. (Default: Default)
Comments
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
3.38. LogReceiver Chapter 3. Configuration Reference
155
To Next Page
Loading...
