D-Link NetDefend DFL-210

dhcprelay
Show the currently relayed DHCP sessions.
dhcprelay -show [-rules] [-routes] [<display filter>]...
Show DHCP/BOOTP relayer ruleset.
dhcprelay -release <ip address> [-interface=<Interface>]
Terminate relayed session.
Options
-interface=<Interface>
Interface.
-release
Terminate relayed session <[interface:]ip>. (Admin only)
-routes
Show the currently relayed DHCP sessions.
-rules
Show the DHCP/BOOTP relayer ruleset.
-show
Show ruleset.
<display filter>
Display filter, filters relays based on interface/ip.
<ip address>
IP address.
2.2.18. dhcpserver
Show content of the DHCP server ruleset.
Description
Show the content of the DHCP server ruleset and various information about active/inactive leases.
Display filter filters leases based on interface/mac/ip (example: if1 192.168.*)
Usage
dhcpserver
Show DHCP server leases.
dhcpserver -show [-rules] [-leases] [-num=<Integer>]
[-fromentry=<Integer>] [-mappings] [<display filter>]...
Show DHCP server ruleset.
dhcpserver -release={BLACKLIST}
Release a specific types of IPs.
dhcpserver -releaseip <interface> <ip address>
2.2.18. dhcpserver Chapter 2. Command Reference
40