Comments
Text describing the current object. (Optional)
3.38.4. LogReceiverSyslog
Description
A Syslog receiver is used to receive log events from the system in the standard Syslog format.
Properties
Name
Specifies a symbolic name for the log receiver. (Identifier)
IPAddress
Specifies the IP address of the log receiver.
Port
Specifies the port number of the log service. (Default: 514)
Facility
Specifies what facility is used when logging. (Default: local0)
LogSeverity
Specifies with what severity log events will be sent to the specified log receiv-
ers. (Optional; Default: Emergency,Alert,Critical,Error,Warning,Notice,Info)
RoutingTable
Specifies the routing table the clients host route should be added to. (Default:
main)
Comments
Text describing the current object. (Optional)
3.38.4.1. LogReceiverMessageException
The definitions here are the same as in Section 3.38.1.1, “LogReceiverMessageException” .
3.38.4. LogReceiverSyslog Chapter 3. Configuration Reference
157
To Next Page
Loading...
