2.2.30. ifstat
Show interface statistics.
Description
Show list of attached interfaces, or in-depth information about a specific interface.
Usage
ifstat
[<Interface>]
[-filter=<expr>]
[-pbr=<table
name>]
[-num=<n>] [-restart] [-allindepth]
Options
-allindepth
Show in-depth information about all interfaces.
-filter=<expr>
Filter list of interfaces.
-num=<n>
Limit list to <n> lines. (Default: 20)
-pbr=<table name>
Only list members of given PBR table(s).
-restart
Stop and restart the interface. (Admin only)
<Interface>
Name of interface.
2.2.31. igmp
IGMP Interfaces.
Description
Show information about the current state of the IGMP interfaces.
Send simulated messages to test configuration of the interface.
Usage
igmp
Prints the current IGMP state.
igmp -state [<Interface>]
Prints the current IGMP state. If an interface is specified, more details are provided.
igmp -query <Interface> [<MC address> [<router address>]]
Simulate an incoming IGMP query message.
2.2.31. igmp Chapter 2. Command Reference
47
To Next Page
Loading...
