All changes made to the object will be lost. If the object is added after the last commit, it will be re-
moved.
To reject the changes in more than one object, use either the -recursive flag to delete a context
and all its children recursively or the -all flag to reject the changes in all objects in the configura-
tion.
See also: activate, commit
Example 2.4. Reject changes
Reject changes in individual objects:
gw-world:/> set Address IP4Address example_ip
Comments="This comment will be rejected"
gw-world:/> reject Address IP4Address example_ip
gw-world:/> add Address IP4Address example_ip2 Address=1.2.3.4
Comments="This whole object will be removed"
gw-world:/> reject Address IP4Address example_ip2
Reject changes recursively:
(will reject changes in the user database and all users)
gw-world:/exampledb> set User user1 Comments="Something"
gw-world:/exampledb> set User user2 Comments="that will be"
gw-world:/exampledb> set User user3 Comments="rejected"
gw-world:/exampledb> cc ..
gw-world:/> reject LocalUserDatabase exampledb -recursive
Reject all changes:
gw-world:/anycontext> reject -all
All changes since the last commit will be rejected:
(example_ip will be removed since it is newly added)
gw-world:/> add IP4Address example_ip Address=1.2.3.4
gw-world:/> delete IP4Address example_ip
gw-world:/> reject IP4Address example_ip
Usage
reject [<Category>] <Type> [<Identifier>] [-recursive]
Reject changes made to the specified object.
reject -all
Reject all changes in the configuration.
Options
-all
Reject all changes in the configuration.
-recursive
Recursively reject changes.
<Category>
Category that groups object types.
<Identifier>
The property that identifies the configuration object. May not be applicable
depending on the specified <Type>.
<Type>
Type of configuration object to perform operation on.
2.1.8. reject Chapter 2. Command Reference
25
To Next Page
Loading...
