LocalReass_NumLarge
Number of large (>2K) local reassembly buffers (of the above
size). (Default: 32)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
3.55.15. LogSettings
Description
Advanced log settings.
Properties
LogSendPerSecLimit
Limits how many log packets the security gateway may send out
per second. (Default: 2000)
AlarmRepeatInterval
Repetition interval for continuous alarms (in seconds). (Default: 60)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
3.55.16. MiscSettings
Description
Miscellaneous Settings
Properties
UDPSrcPort0
How to treat UDP packets with source port 0. (Default:
DropLog)
Port0
How to treat TCP/UDP packets with destination port 0 and
TCP packets with source port 0. (Default: DropLog)
WatchdogTimerTime
Number of non-responsive seconds before watchdog is
triggered (0=disable). (Default: 180)
BufFloodRebootTime
How long to allow completely flooded buffers before reboot-
ing the Security Gateway. (Default: 3600)
ScrSave
Screen saver selection. (Default: ScrSaveBlank)
StatusBar
Status bar control. (Default: Auto)
ScrSaveTime
Idle seconds before screen saver is automatically activated
(0=disable). (Default: 300)
3.55.15. LogSettings Chapter 3. Configuration Reference
196
To Next Page
Loading...
