Daedong HX9010 - Pto Cruise On;Off Switch; Pto Restart;Setting Switch

HX9010/1001/1151/1201
4
-
10
HX1O409U
(1) PTO Restart (Res +)/Setting (Set -) Switch
(A) Restart (Res +) (B) Setting (Set -)
It is a function to control the engine
rpm for comfortable driving at engine
1,300rpm or higher.
PTO CRUISE ON/OFF
SWITCH
(1) PTO Cruise ON/OFF Switch
(A) ON (B) OFF
HX1O410U
PTO CRUISE DEACTIVATION
Depress the brake pedal or clutch
pedal or set the PTO cruise switch to
the "OFF" position to deactivate the
PTO cruise function.
If the PTO cruise function is deactivat-
ed by depressing the brake or clutch
pedal with the PTO cruise switch set in
the "ON" position, pressing the RES(+)
switch once resumes the previous
PTO activation setting.
PTO RESTART/SETTING SWITCH
PTO CRUISE ACTIVATION
Run the engine at a speed over 1,300
RPM. With the brake and clutch
pedals released, set the PTO cruise
switch to the ON position and press
the SET (1) portion of the cruise acti-
vation switch
The cruise setting switch can be
operated as follows while the PTO
cruise function is activated.
• RES(+) : Speed is increased by 50
RPM when pressing it.
• SET(-) : Speed is decreased by 50
RPM when pressing it.
IMPORTANT
• If the brake pedals are not
connected to each other, de-
pressing the brake pedal does
not deactivate the PTO cruise
function.
TG300(HX9010,1001,1151,1301,1401)-수출(통합)-OM-04.indd 10TG300(HX9010,1001,1151,1301,1401)-수출(통합)-OM-04.indd 10 2022-08-16 오전 11:08:102022-08-16 오전 11:08:10