Daedong HX9010 - Pto Shift Lever

HX9010/1001/1151/1201
4
-
32
• The tractor is not braked by de-
pressing the brake pedal rmly
without depressing the clutch
pedal at the creep speed as ro-
tational force of the axle has a
major e󰀨ect at the creep speed.
CAUTION
• When working with a loader
• When doing public works
3. Precautions for creep speed
• Make sure to shift with the clutch
pedal fully depressed.
• Start o󰀨 the tractor with the parking
brake released.
• Depress the brake pedal after disen-
gaging the clutch to stop the tractor.
(1) PTO Shift Lever
PTO SHIFT LEVER
(rpm)
1st 2nd 3rd
540 750 1,000
This lever is used to shift to one of
the 3 PTO speeds as follow:
※ Engine rpm: 2,200
HX1O417A
rotational force of the axle has major
e󰀨ect on the tractor. (Mechanical)
Misuse of this lever can result in mal-
function or damage. Therefore, note
the followings:
1. It is recommended to use the
creep speed under the following
conditions
• When cultivating a eld deeply or
shallowly
• When it is not possible to work at the
standard speed due to hard soil
• When transplanting
• When working with a trencher.
(Agricultural)
• When loading or unloading during
driving
2. It is recommended not to use the
creep speed under the following
conditions
• When getting out of a puddle in
muddy area
• When towing or trailing
TG300(HX9010,1001,1151,1301,1401)-수출(통합)-OM-04.indd 32TG300(HX9010,1001,1151,1301,1401)-수출(통합)-OM-04.indd 32 2022-08-16 오전 11:08:362022-08-16 오전 11:08:36