EasyManua.ls Logo

Daedong KIOTI CS2610 - Adjusting ENGINE Valve Clearance (Ae); Adjusting Engine Valve Clear- Ance (Ae); Replacing Air Cleaner Filter (Af)

Daedong KIOTI CS2610
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
7
-
29
MAINTENANCE
This service can be affected by the
engine sensitively. Therefore, contact
your local KIOTI Dealer for this ser-
vice.
ADJUSTING ENGINE VALVE
CLEARANCE (AE)
If the air cleaner is not in good condi-
tion, the lifetime of the engine can
be shortened, excessive soot can be
produced, and the engine power can
be deteriorated. Therefore, the lter
should be inspected frequently. Its
replacement interval can be changed
according to driving conditions. Re-
place the filter according to the fol-
lowing proce-dure:
1. Open the hood and check the suc-
tion hose and air cleaner housing
for damage.
(1) Filter (2) Cap
(3) Evacuator Valve

2. Unscrew the air cleaner clip and
remove the cover.
3. Clean the inside of the air cleaner
housing by blowing compressed
air through it.
4. Replace the filter and check the
housing for damage.
5.
Install the cover andx it with the clip.
M46O724A
Use only a genuine KIOTI fil-
ter. Use of a non-recommend-
   
the engine and sensor.
Make sure that no dust enters
the system by installing the

When removing the filter, be
careful not to let foreign mate-
rial enter the air inlet.
CAUTION
When installing the cover, make
sure that the dust collection
valve is heading downward.
NOTE
M46-EU,AU-EEC인증용-07.indd 29 2017-04-25 오후 5:00:08

Table of Contents

Related product manuals