EasyManua.ls Logo

Daedong KIOTI CS2610 - Combination Switch

Daedong KIOTI CS2610
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CS2610
4
-
6
COMBINATION SWITCH
(1) Head Light Switch
(A) OFF (B)
(C)
M46O405A
The combination switch consists of
the head light, turn signal light, and
horn switches. Its function by its po-
sition is as follows:
HEAD LIGHT SWITCH
The head light switch can be oper-
ated only while the key switch is
turned to the "ON" position. Turning
the head light switch clockwise one
click will tail lights while turning it
one more click will illuminate the low
beam head lights and tail lights.
M46O404A
(1) Turn Signal Light Switch
(2) Head Light Switch (3) Horn Switch
OFF: H ea d l ig ht a nd t ai l l ig ht
"OFF"
: Head light "OFF" and tail
light "ON"
: Low beam and tail light "ON"
Stop the engine immediately
if the oil pressure warning
lamp does not go off after the
engine is started. The engine
may be severely damaged.
If the battery charge warning
lamp does not go off after the
engine is started, check the elec-
trical systems, such as the alter-
nator, for damage. Continuing to
use the engine under this condi-
tion can discharge the battery or
damage other electrical devices.
CAUTION
The ignition key is not directional
and can be inserted in any direc-
tion. Also, be careful not to leave
the tractor unattended as the
same key is used for all KIOTI
tractors. It can be stolen.
The horn, turn signal lamp, and
hazard lamp can be operated
without the key inserted.
NOTE
Driving with high beam head
light disturbs an approach-
ing vehicle’s visibility for safe
driving. Use the high beam
head lights only if necessary.
WARNING
M46-EU,AU-EEC인증용-04.indd 6 2017-06-16 오후 1:06:50

Table of Contents

Related product manuals