-
instructions on the container
-
age.
-
-
facturer.
be used.
•
•
•
CAUTION
Always wear the right sort of
•
WARNING
FLUSH COOLING SYSTEM AND CHANGING COOLANT (AJ)
(1) Drain Cock
1. Stop the engine and let it cool.
2. To drain coolant, unscrew the drain
cock under the injection pump and
open the radiator cap.
3. After all coolant is drained, close
the drain cock.
4. Fill with clean water and cooling
system cleaner.
5. Follow the cleaner manufacture’s
instruction.
6. Install the radiator cap securely.
M46O733A
(1) Radiator Cap (2) Reservoir Tank
(A) FULL (B) LOW
7. Start and operate the engine for
few minutes.
8. Stop the engine and let cool.
9. Check coolant level of reservoir
tank and add coolant if necessary.
3.6 L (1.0 U.S.gal.)
M46O734A
To Next Page
Loading...
