EasyManua.ls Logo

Daedong KIOTI CS2610 - STOPPING the ENGINE; Warming up

Daedong KIOTI CS2610
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CS2610
5
-
8
Never touch the mufer or hot
covers until they are cooled
down after running the engine
or driving the tractor.
WARNING
Turn off all the electrical de-
vices and remove the ignition
key before leaving the tractor.
The horn, turn signal lamp and
hazard lamp can be operated
without the key inserted. How
-
ever, using these components
without the engine started can
discharge the battery.
IMPORTANT
STOPPING THE ENGINE
1. Make sure to reduce the engine
rpm before stopping the engine.
2. Depress the clutch pedal and put
all shift levers in the neutral posi-
tion.
3. Run the engine at the idle speed
for approx. 2 to 3 minutes, and
then turn the key switch to the
"OFF" position to stop the engine.
T85O532A
WARMING UP
It is recommended always to warm
up the engine before driving in or-
der to maintain the durability of the
engine and prevent malfunction of
the engine. Before warming up the
engine, make sure that each part in
the engine is properly lubricated and
each hydraulic part is in a perfect
condition in order to prevent mal-
function in the engine as well as the
hydraulic system.
M46-EU,AU-EEC인증용-05.indd 8 2017-03-10 오전 8:27:33

Table of Contents

Related product manuals