EasyManua.ls Logo

Daedong KIOTI CS2610 - Inflation PRESSURE

Daedong KIOTI CS2610
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CS2610
4
-
28
Always maintain the proper tire ination pressure. Make sure the tire pressure
does not exceed the pressure recommended in the manual.
INFLATION PRESSURE
ITEM
CS2610
Tire sizes Ination pressure
Front
Farm - -
Turf 18 x 8.5 - 8 R3 0.6~1.4 kg/cm², 60~140 Kpa, 8.7~20.3 psi
IND 18 x 8.5 - 8 R4
0.6~1.4 kg/cm², 60~140 Kpa, 8.7~20.3 psi
Rear
Farm - -
Turf 26 x 12.00 - 12 R3 0.8~1.4 kg/cm², 80~140 Kpa, 11.6~20.3 psi
IND 26 x 12.00 - 12 R4
0.8~1.4 kg/cm², 80~140 Kpa, 11.6~20.3 psi
IND… for Industrial.
Keep the front tire pressure to maximum if maximum load is applied to the
loader or front weight.
If tires with a different size from the ones already in use are installed, con-
tact the KIOTI dealer for the front / rear wheel speed ratio. Improper front /
rear wheel speed ratio can result in excessive wear of the tires.
NOTE
T46w031A
Do not weld or apply heat to
the tire rim or disc. The tire
can explode due to the rapidly
increased pressure in the tire.
Check tires for ination pres-
sure, damage, deformation,
and extended wear on lug and
damage of rim and disc. Also
check if wheel bolts, rim bolts,
and nuts are loose.
WARNING
M46-EU,AU-EEC인증용-04.indd 28 2017-06-16 오후 1:07:08

Table of Contents

Related product manuals