PARKING BRAKE LEVER
To stop the tractor, depress the brake
pedal and pull the lever up to apply
the parking brake.
The parking bake is automatically
released by depressing and then re-
leasing the brake pedal.
(1) Parking Brake Lever (2) Brake Pedal
(A) Depressing (B) Pressing Up
M46O447A
FRONT WHEEL DRIVE LEVER
(1) Front Wheel Drive Lever (4WD)
(A) : ON (B) : OFF
Using the 4WD is the best way to
increase the vehicle traction. Pull the
4WD lever down to engage, push to
disengage.
The 4WD function can be used un-
der the following conditions:
1. If high traction is needed in a hu-
mid area.
2. When towing a trailer or using a
loader.
3. When working on a sandy surface.
M46O429A
4. When the tractor is pushed out by
reaction from the implement during
cultivating on a hard surface.
5. When cultivating a eld or driving
over a bank.
Be sure to full stop the tractor before
engaging or disengaging the 4WD.
If the vehicle is driven with the
parking brake partially or com-
pletely engaged, it may cause
early wear of the brake disc.
•
CAUTION
To avoid accident:
Engage only when the vehicle
is stationary.
While the 4WD is engaged,
drive th e v e h i c l e with low
speed as steering and braking
characteristics may differ.
The 4WD should not be used
on a paved road as tires can
be worn faster.
•
•
•
CAUTION
To Next Page
Loading...
