EasyManua.ls Logo

Daedong KIOTI CS2610 - Page 169

Daedong KIOTI CS2610
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
7
-
35
MAINTENANCE
M46O737A
There are marks indicating the fuse
capacity and location on the cover of
the fuse panel. Replace the fuse ac-
cording to the following procedure:
1. Turn the key switch to the "OFF"
position and turn "OFF" all the
electrical devices.
2. O p e n the fuse box cover an d
check the fuse in question using
fuse tongs.
(1) Fuse Storage Case (2) Fuse
H11O655A
3. If the fuse is blown, replace it with
a new fuse with same capacity.
Make sure it is rmly installed.
4. Install the fuse box cover.
Never use a fuse with the ca-
   

If using a faulty fuse, steel
wire, or foil, the electrical de-
vice can be damaged or even

WARNING
If the replaced fuse blow, it is
probable that the wiring system
is faulty. In this case, contact
your local KIOTI Dealer.
If the fusible link, relay or other
electrical component is faulty,
contact your local KIOTI Dealer.
NOTE
M46-EU,AU-EEC인증용-07.indd 35 2017-04-25 오후 5:00:11

Table of Contents

Related product manuals