M55O115a
10. Use jack lifts of suitable capac-
ity and apply them at the center
of the front and rear axles while
paying due attention to weight
distribution.
11. No decals for the lifting point are
applied on the tractor, as they
would be too difcult to apply in
the available spaces and would
be easily removed or defaced
during normal operation of the
tractor.
T66O127a
15. When working with your trac-
tors electrical components you
must rst disconnect the battery
cables.
16. TO E N S U R E T H AT T H E R E
ARE NO ACCIDENTS FROM
SPARKS YOU MUST FIRST
DISCONNECT THE NEGATIVE
BATTERY CABLE.
Apply the jack lift to the lifting
points according to the type of
operation and follow the safety
procedures given before.
•
NOTE
To Next Page