To reduce risks, the following precau-
tions should be used.
- Only use loader equipped with a
load self-levelling system, i.e. of the
parallelogram type.
- Only use specific implements for
the operation to be performed.
Strictly follow the directions and
warnings in the loader's operation
manual.
- Use the machine and the imple-
ment with caution, drive on plane
ground and avoid pits, excavations
and ditches. Do not turn, start or
stop abruptly.
- If a front loader is mounted, it is
advisable to use a tractor with cab
or with a 4-post frame with FOPS
safety system. The loader installer
should carefully analyze all risks
and make all required adjustments.
• Hitch loads to the drawbar only.
Towing or attaching to other loca-
tions may cause the tractor to over-
turn.
• Improper use of the drawbar, even
if correctly positioned, can cause a
rear overturn.
• DO NOT overload an attachment
or towed equipment. Use proper
counterweights to maintain tractor
stability. Hitch heavy loads to the
drawbar only.
Tg2O111a
• Check for correct coupling between
tow hook and trailer. See the Tow-
ing Attachments section.
• Us e b a lla s t w e ig h t a s r e com -
mended. NEVER add more ballast
to compensate a higher load than
allowed. Reduce load.
To Next Page
Loading...
