ReMOvAL AND INSTALLATION OF 3-POINT
hITCh IMPLeMeNT (WITh PTO ShAFT) ......... 6-2
MOWER IMPLEMENT ................................................. 6-2
OPeRATION TIP FOR 3-POINT hITCh eLeMeNTS .... 6-5
ADJUSTMENT OF LIFT ROD ...................................... 6-6
ADJUSTMENT OF TOP LINK ......................................
6-6
ADJUSTMENT OF STABILIZER ..................................
6-7
DRAFT HITCH AND TRAILER .....................................
6-7
PTO & PTO SHIELD GUARD ......................................
6-9
INSTALLING PTO SHAFT
............................................ 6-9
hANDLINg LOADeR ......................................... 6-11
FIXATION POINTS FOR ATTACHMENT ................... 6-12
DRIVING ON SLOPE .................................................
6-13
JOYSTICK LEVER .....................................................
6-14
HPL VALVE ................................................................
6-17
MAINTeNANCe ...................................................7-1
MAINTeNANCe CheCK LIST .............................. 7-3
DAILY CHECK CHART ................................................ 7-3
MAINTENANCE SCHEDULE CHART .........................
7-4
LUBRICANTS ........................................................ 7-7
MAINTeNANCe CODe .........................................
7-8
HOW TO DISCONNECT THE HOOD (A) ................... 7-8
OPENING SIDE COVER (B) ........................................
7-8
CHECKING AND ADDING FUEL (C) ...........................
7-9
CHECKING TRANSMISSION FLUID LEVEL (D)
....... 7-10
CHECKING ENGINE OIL LEVEL (E) ..........................
7-11
CHECKING COOLANT LEVEL (F) ............................
7-12
CLEANING GRILL, RADIATOR SCREEN (G) ...........
7-13
CHECKING BRAKE PEDALS (H) ..............................
7-13
CHECKING GAUGES, METER AND EASY CHECK
LAMPS (I) ...............................................................
7-13
CHECKING HEAD LIGHT, HAZARD LIGHT ETC. (J) ..
7-13
CHECKING SEAT BELT AND ROPS (K) ...................
7-13
CHANGING ENGINE OIL AND REPLACING FIL
-
TER (L) ...................................................................
7-14
REPLACING TRANSMISSION FLUID AND FILTER
(M) ........................................................................... 7-16
CHANGING FRONT AXLE CASE OIL (N) .................
7-18
ADJUSTING BRAKE PEDAL (O) ...............................
7-19
LUBRICATING GREASE FITTINGS (P) ....................
7-20
TABLe OF CONTeNTS
To Next Page