Make sure that the brake pedals
are fully depressed before pull-
ing the parking brake lever up.
•
IMPORTANT
4. Press the PTO lever to the "Disen-
gage" position.
1. Make sure there is no hazardous
obstacle around the tractor.
2. Make sure the parking brake is set
(1) Depress the parking brake ped-
al and pull the lever up. (Check
that the parking brake lamp on
the gauge board illuminates)
(2) To release the parking brake
press the brake pedals again.
(1) PTO Clutch Lever
(2) Range Gear Shift Lever (Hi-N-Lo)
(3) Forward / Reverse Driving Pedal
(1) Parking Brake Lever (2) Brake Pedal
(A) Depressing (B) Pressing Up
M46O446A
M46O447A
To Next Page
Loading...
