Dahua IPC-HFW2431T-ZS-S2 User Manual

Figure 4-127 Wiper
Step 2 Congure wiper work mode.
Table 4-46 Description of wiper parameters
Parameter
Description
Interval Time
The interval time between stop mode and start mode. For example, set
the time to10 s, and the wiper will work every 10 s.
Start Set the work status of the wiper.
●
Start: Click Start, and the wiper works as the set interval time.
●
Stop: Click Stop, and the wiper stops working.
●
Once: Click Once, and the wiper works once.
Stop
Once
Time Wash
Select the Time Wash check box and set the time, and then the wiper
will work as the set time. Click Once, and the wiper works once. It can
be used to check whether the wiper can work normally.
Step 3 Click Save.
Operation Manual
135

Dahua IPC-HFW2431T-ZS-S2 Specifications

General

Brand	Dahua
Model	IPC-HFW2431T-ZS-S2
Category	Security Camera
Language	English