Dahua Mobile DVR Series - Page 127

116
5.6.2.3 Connection
From main window->Setup->Network->Connection, the connection interface is shown as in
Figure 5-25.
Note
Except max connection value, device needs to reboot to activate new setup.
Figure 5-25
Please refer to the following sheet for detailed information.
Parameter
Function
Max
connection
It is the max Web connection for the same device. The value ranges from 1 to
120. The default setup is 120.
TCP port
The default value is 37777. You can input the actual port number if
necessary.
UDP port
The default value is 37778. You can input the actual port number if
necessary.
HTTP port
The default value is 80. You can input the actual port number if necessary.
HTTPS
The default value is 443. You can input the actual port number if necessary.
RTSP port
 The default value is 554. Please leave it in blank if you are using default
value. When you are using QuickTime or VLC, you can use the following
format. BlackBerry cellphone support this function too.
 Real-time monitoring URL format: please require real-time RTSP media
server, require channel number, and bit stream type in URL. You may
need username and password.
 When you are using BlackBerry, please set encode mode as H.264B,
resolution to CIF and turn off audio.
URL format is:
rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=0
username/password/IP and port.
 Username: such as admin.
 Password: such as admin.