Dahua NVR1A-4P Series User Manual

118
Figure 4-96
Step 2 Select the Enable check box to enable DDNS function.
After enabling DDNS, third-party server may collect your device information.
Step 3 Configure the DDNS parameters according to practical situation.
 Type/address:
 NO-IP DDNS is dynupdate.no-ip.com.
 CN99 DDNS is members.3322.org.
 Domain: The domain name registered on the DDNS service provider website.
 User name/password: Input the user name and password got from the DDNS service provider. Make
sure you have logged in the DDNS service provider website to register an account (user name and
password).
 Interval: After DDNS boots up, it sends out refresh query regularly. The unit is minute.
Step 4 Click Apply or Save to complete setup.
Step 5 Open a browser and input domain name, click Enter key.
The setting is right if you can view device WEB interface. Otherwise, please check the
parameters.
4.8.1.4 Email
The email interface is shown as below. See Figure 4-97.
 SMTP server: Please input your email SMTP server IP here.
 Port: Please input corresponding port value here.
 User name: Please input the user name to login the sender email box.
 Password: Please input the corresponding password here.
 Sender: Please input sender email box here.

Dahua NVR1A-4P Series Specifications

General

Brand	Dahua
Model	NVR1A-4P Series
Category	DVR
Language	English