42
Step 7 Set security questions.
Note
After setting the security questions here, you can use the email you input here or answer the
security questions to reset admin password. Refer to chapter 4.1.3 Reset password for detailed
information.
Cancel the email or security questions box and then click Next button to skip this step.
Email: Input an email address for reset password purpose. In case you forgot password in the
future, input the security code you got on the assigned email to reset the password of admin. If
you have not input email here or you need to update the email information, please go to the
main menu->Setting->System->Account to set. Refer to chapter 4.10.1.1.2 Modify User for
detailed information.
Security question: Set security questions and corresponding answers. Properly answer the
questions to reset admin password. In case you have not input security question here or you
need to update the security question information, please go to the main
menu->Setting->System->Account->Security question to set. Refer to chapter 4.10.1.3 Security
Question for detailed information.
Note
If you want to reset password by answering security questions, please go to the local menu
interface.
Step 8 Click OK to complete the device initialization setup.
Device goes to startup wizard interface. Refer to chapter 4.1.4 Quick Settings for detailed
information.
4.1.3 Reset Password
If you forgot the admin password, you can reset the password by the following ways:
When the password reset function is enabled, you can scan the QR code on the local interface to
reset the password.
When the password reset function is disabled, you can reset password via the security questions
configured before. If the secury questions are not configured, system displays that Password reset is
closed! You need to contact the customer service for help.
Step 1 Go to the device login interface. See Figure 4-4 or Figure 4-5. .
If you have set unlock pattern, device displays unlock pattern login interface. See Figure 4-4.
Click “Forgot unlock pattern”, device goes to Figure 4-5.
If you have not set unlock pattern, device displays password interface. See Figure 4-5.
Note
Click Switch user button, NVR goes to general user login interface. The default user name is admin.
Click the user name and then select a user from the dropdown list; you can login via other account.
To Next Page
Loading...
Need help?
General