155
Figure 5-4
System pops up warning information to ask you whether install Web plug-in or not. Please click yes
button.
After installation, the interface is shown as below. See Figure 5-5.
Figure 5-5
Please input your user name and password.
Factory default user name is admin and password is what you set in chapter 5.2 Device initialization.
5.4 Reset Password
If you forgot admin password, you can reset the password by email or by answering the security
questions (local menu only).
When the password reset function is enabled, you can scan the QR code on the Web to reset the
password.
When the password reset function is disabled, you can reset password via the security questions
To Next Page
Loading...
Need help?
General