159
yellow. Please note, if audio input port from the device to the client-end is using the first channel audio
input port. During the bidirectional talk process, system will not encode the audio data from the 1-channel.
Figure 5-12
Section 5: Instant record button. Click it, the button becomes yellow and system begins manual
record. See Figure 5-13. Click it again, system restores previous record mode.
Figure 5-13
Section 6: Local play button.
The Web can playback the saved (Extension name is dav) files in the PC-end.
Click local play button, system pops up the following interface for you to select local play file. See Figure
5-14.
Figure 5-14
Section 7: PTZ operation panel. Please refer to chapter 5.7 for detailed information.
Section 8: Image setup and alarm setup. Please refer to chapter 5.8 for detailed information.
Section 9: From the left to the right, you can see video quality/fluency/ full screen/1-window/4-window.
You can set video fluency and real-time feature priority.
5.6 Real-time Monitor
In section 2, left click the channel name you want to view, you can see the corresponding video in current
window.
On the top left corner, you can view device IP(172.11.10.11), channel number(1), network monitor bit
stream(2202Kbps) and stream type(M=main stream, S=sub stream). See Figure 5-15.
To Next Page
Loading...
