127
﹡ means the second HDD is current working HDD.
The corresponding HDD property.
HDD can work properly or not.
Display there is bad track or not.
Click it to view previous page.
Click it to view the next page.
Click it to view HDD record information (file start time and end time).
View HDD
type and
capability
Click it to view HDD property, status and etc,
4.9.6 HDD Detect
Note
This function is for some series product only.
The HDD detect function is to detect HDD current status so that you can clearly understand the HDD
performance and replace the malfunction HDD.
There are two detect types:
Quick detect is to detect via the universal system files. System can quickly complete the HDD
scan. If you want to use this function, please make sure the HDD is in use now. If the HDD is
removed from other device, please make sure the write-data once was full after it installed on
current device.
Global detect adopts Windows mode to scan. It may take a long time and may affect the HDD
that is recording.
4.9.6.1 Manual Detect
From main menu->Setting->Storage->HDD Detect->Manual Detect, the interface is shown as below. See
Figure 4-105.
Please select detect type and HDD. Click start detect to begin. You can view the corresponding detect
information.
To Next Page
Loading...
Need help?
General