EasyManuals Logo

Dahua NVR1A-4P Series User Manual

Dahua NVR1A-4P Series
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #127 background imageLoading...
Page #127 background image
115
Figure 4-93
4.8 Network
4.8.1 Network Settings
4.8.1.1 TCP/IP
The interface is shown as in Figure 4-94 .
IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two IP address
format and you can access via them.
MAC address: The host in the LAN can get a unique MAC address. It is for you to access in the LAN. It is
read-only.
IP address: Here you can use up/down button () or input the corresponding number to input IP
address. Then you can set the corresponding subnet mask the default gateway.
Default gateway: Here you can input the default gateway. Please note system needs to check the
validity of all IPv6 addresses. The IP address and the default gateway shall be in the same IP
section. That is to say, the specified length of the subnet prefix shall have the same string.
Preferred DNS server: DNS server IP address.
Alternate DNS server: DNS server alternate address.
After completing all the setups please click save button, system goes back to the previous menu.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua NVR1A-4P Series and is the answer not in the manual?

Dahua NVR1A-4P Series Specifications

General IconGeneral
BrandDahua
ModelNVR1A-4P Series
CategoryDVR
LanguageEnglish

Related product manuals