197
item is for disk no space type only.
Check the box here to enable selected function.
The alarm output can delay for the specified time after an alarm stops.
The value ranges from 0s to 300s. The default setup is 10 seconds. The
o second means there is no delaying time.
It is to set login attempt times. Once the login attempt exceeds the
threshold you set here, current account will be locked. This function is
for illegal login only.
It is to set account lock time once its login attempt has exceeded the
threshold you set. This function is for illegal login only.
System can pop up a message to alarm you in the local host screen if
you enabled this function.
Check the box here, system can record the network event alarm log.
5.10.4 Storage
5.10.4.1 Basic
It is to manage HDD storage space.
Step 4 From main menu->Setup->Storage->Basic.
Enter Basic interface. See Figure 5-69.
Figure 5-69
Step 5 Set parameters.
It is to select working mode when hard disk is full. There are two options:
stop recording or overwrite.
It is to specify record duration. The max value is 120 minutes.
Never: Do not auto delete old files.
Customized: input customized period here, system can auto delete
corresponding old files
5.10.4.2 Schedule
In this interfaces, you can add or remove the schedule record setup. See Figure 5-70.
There are four record modes: general (auto), motion detect, alarm and MD&alarm. There are six periods
To Next Page
Loading...
Need help?
General