Dahua NVR1A-4P Series User Manual

185
Figure 5-49
Step 2 Select the Enable check box.
After enabling DDNS, the third-party server might collect your device information.
Step 3 Select the DDNS type and configure the parameters. For details, see the below table.
Parameter
Function
DDNS Type
You can select DDNS protocol from the dropdown list and then
enable DDNS function.
Host IP
DDNS server IP address
Domain Name
Your self-defined domain name.
Username
The username you input to log in the server.
Password
The password you input to log in the server.
Test
After the configuration, click Test and system saves the
configuration and check if the domain name can be registered
successfully.
 If succeeded, go to step 4.
 If failed, check if the domain information is correct and clear
the browser buffer.
System supports this function when DDNS type is NO-IP DDNS.
Interval
The time interval to send update request. Unit: Minute.
Step 4 After setting, click Save button.
Step 5 Input full domain name on the browser and click Enter button. The setting is right if you can view
device WEB interface. Otherwise, please check the parameters.
5.10.2.5 Email
The email interface is shown as in Figure 5-50.

Dahua NVR1A-4P Series Specifications

General

Brand	Dahua
Model	NVR1A-4P Series
Category	DVR
Language	English