User's Manual
151
Figure 5-42 Preset
Step 2 Click the direction arrows to the required position.
Step 3 In the
Preset
box, enter the value to represent the required position.
Step 4 Click
Setting
to complete the preset settings.
5.6.7.3.2 Configuring Tours
Procedure
Step 1 On the expanded PTZ control panel, click .
Step 2 Click the
Tour
tab.
Figure 5-43 Tour
Step 3 In the
Tour No.
box, enter the value for the tour route.
Step 4 In the
Preset
box, enter the preset value.
Step 5 Click
Add Preset
.
To Next Page
Loading...
Need help?
General
