User's Manual
407
Table 5-86 Display parameters
Parameter Description
Main Screen/Sub
Screen
Configure the output port format of both screens.
●
When sub screen is disabled, the format of main screen is HDMI/VGA
simultaneous output.
●
When sub screen is enabled, the format of main screen and sub
screen are non-simultaneous outputs.
◇
When output port of sub screen is set to
HDMI
, the output port of
main screen is set to
VGA
by the device.
◇
When output port of sub screen is set to
VGA
, the output port of
main screen is set to
HDMI
by the device.
Enable Decoding After it is enabled, the device can normally decode.
Time Title/Channel
Title
Select the checkbox and the date and time of the system will be displayed
in the preview screen.
Transparency
Set the transparency of the local menu of the NVR device. The higher the
transparency, the more transparent the local menu.
Time Title/Channel
Title
Select the checkbox and the date and time of the system will be displayed
in the preview screen.
Image
Enhancement
Select the checkbox to optimize the preview image edges.
SMD Preview Select the checkbox to display the SMD previews in the live view page.
AI Rule
Select the checkbox to display the AI rules in the live view page.
This function is for some series products only.
Original Ratio
Click
Setting
and select the channel to restore the corresponding channel
image to the original scale.
Live Audio
Configure audio input on live view. You can select
Audio 1
,
Audio 2
, and
Mixing
. For example, if you select
Audio 1
for
D1
channel, the sound of
audio input port 1 of camera is playing. If you select
Mixing
, the sound of
all audio input ports are playing.
Resolution Support 1920 × 1080, 1280 × 1024 (default), 1280 × 720.
Step 3 Click
Apply
.
5.16.2 Tour
You can configure a tour of selected channels to repeat playing videos. The videos display in turn
according to the channel group configured in tour settings. The system displays one channel group
for a certain period and then automatically changes to the next channel group.
Procedure
Step 1 Select
DISPLAY
>
Tour Setting
>
Main Screen
.
To Next Page
Loading...
Need help?
General
