User's Manual
171
Figure 5-65 Search device
●
For cameras accessed through private protocol, you can click
LIVE
and then enter the
username and password to play live video.
●
To filter the remote devices, you can enter all or part of device name in the
Filter
box.
●
To filter out the uninitialized devices, click the
Not Initialized
tab, and then you can
initialize the devices. For details, see "5.7.1 Initializing Remote Devices".
●
To view all remote devices added through plug and play, you can click the
Not Auto
Connected
tab. You can remove devices added through plug and play, and they can
be automatically added again after plug and play is enabled.
Step 3 (Optional) Enable
Plug and Play
.
When
Plug and Play
is enabled, the NVR automatically adds remote devices on the same
subnet.
For uninitialized remote devices, the NVR automatically initializes them before adding
them.
Step 4 (Optional) Enable
H.265 Auto Switch
.
To Next Page
Loading...
Need help?
General
