Step 3 Click Apply.
5.12.2 Disk Manager
Select Main Menu > STORAGE > Disk Manager, and then you can set HDD properties and format
HDD.
Figure 5-242 Disk manager
View HDD Information
You can view the physical position, properties, status and storage capacity of each HDD.
Congure HDD Properties
In the Properties column, you can set read and wire, read-only and redundant HDD.
When there are two or more HDDs installed on the Device, you can set one HDD as redundant disk
to back up recorded les.
Format HDD
Select an HDD, click Format, and then follow the on-screen prompts to format the HDD.
●
Formatting will erase all data in the HDD, proceed with caution.
User's Manual
369
To Next Page
Loading...
