User's Manual
326
Figure 5-215 Disk exception
Step 2 Click each tab and then select an event type.
●
Disk
: The system detects HDD error, no HDD, no space, and other HDD events.
●
Network
: The system detects network errors such as disconnection, IP conflict, and
MAC conflict.
●
Device
: The system detects device errors such as abnormal fan speed and network
security error.
Step 3 Click to enable the function.
Step 4 (Optional) If the event type is
Low Space
, you need to configure the threshold of storage
space.
When the storage space is lower than the threshold, an alarm is triggered.
Step 5 Configure alarm linkage. For details, see Table 5-50.
Step 6 Click
Apply
.
5.10.9 Disarming
You can disarm all alarm linkage actions as needed through one click.
Procedure
Step 1 Select
Main Menu
>
ALARM
>
Disarming
.
Step 2 Select
On
for
Disarming
to enable disarming.
To Next Page
Loading...
Need help?
General
