User's Manual
176
Step 4 Click
OK
.
5.7.3.2 Changing IP Address of Unconnected Cameras
Procedure
Step 1 Select
Main Menu
>
CAMERA
>
Camera List
>
Camera List
.
Step 2 Click
Search Device
.
The remote devices found are displayed at the upper pane.
Step 3 Click , or select one or more remote devices and then click
Modify IP
.
When changing the IP addresses of multiple remote devices at the same time, make sure
that they share the same username and password.
Step 4 Enter username and password of the remote device, and then configure the IP address.
●
DHCP
: The remote device gets a dynamic IP address automatically.
●
Static
: You need to enter static IP address, subnet mask, and default gateway. When
changing IP addresses of multiple remote devices at the same time. enter the
incremental value so that the system can add the fourth decimal digit of the IP address
one by one according to the incremental value.
Step 5 Click
OK
.
5.7.4 Configuring Image Settings
You can set network camera parameters according to different environments to get the best video
effect.
Procedure
Step 1 Select
Main Menu
>
CAMERA
>
Image
.
To Next Page
Loading...
Need help?
General
