User's Manual
198
Figure 5-87 Recording mode
Step 2 Configure parameters.
Table 5-25 Recording mode parameters
Parameter Description
Channel
Displays all the connected channels. You can select a single channel or
select
All
.
Recording status
●
Auto: Automatically make recordings according to the schedule.
●
Manual: Makes a general recording within 24 hours for the selected
channel.
●
Off: Do not record.
Snapshot status
Enable or disable the scheduled snapshot for the corresponding
channels.
Step 3 Click
Apply
.
5.8.2 Search and Playback
5.8.2.1 Search Page
You can search for and play back the recorded files on the NVR.
Select
Main Menu
>
SEARCH
, or right-click on the live view page and then select
Search
.
To Next Page
Loading...
Need help?
General
